GE 26 Manual Del Propietario Y Instalación página 19

Installation Instructions
[] REMOVE THE FREEZER DOOR
[] Pullthe freezer door open to full extension.
[] Removethe freezer bin bu pulling both brackets upward
at the same time. (Seepage 10.}
[] Take out the lower basket by lifting the basket up from
the rail sgstem.{Seepage 10.)
[] Removethe two 10 mm hex-head bolts from the right
and left side.
[] REMOVE THE FREEZER DOOR lcont.)
[] Usethe tip of a screwdriver to separate the rail from
the rail cover.Tilt the front end up and lift the entire door.
[] Set the door front on a nonscratching surface.
[] Pushthe rail assemblies back into the cabinet.
CAUTION:
P ushboth sides of the rail
assembliesback at the same time.
[] REPLACING THE FREEZER DOOR
Two people mag be required to complete this procedure.
ATTACH AND SECURE THE DRAWER FRONT TO
THE SLIDES
[] Pullout the rail assembliesto the full length on each side
of the cabinet.
.ii CAUTION:
Make sure to pull out the side
rails evenlg.
19