GE 26 Manual Del Propietario Y Instalación página 22

Installation Instructions
INSTALLING THE REFRIGERATOR
(cont.)
I_1 LEVEL THE REFRIGERATOR
The leveling legs have 2 purposes:
1) Leveling legs adjust so the refrigerator is
firmlg positioned on the floor and does not
wobble.
2) Leveling legs serve as a stabilizing brake
to hold the refrigerator securelg in position
during operation and cleaning. The leveling
legs also prevent the refrigerator from
tipping.
[] Turn the leveling legs clockwise to raise
the refrigerator, counterclockwise to lower it.
Flat-Head Screwdriver
CAUTION:
To avoid possible
personal injurg or property damage,
the leveling legs must be firmlg touching
the floor.
I_1 LEVEL THE REFRIGERATORDOORS
Remember a level refrigerator is necessarg for
getting the doors perfectlg even. If you need help,
review the previous section on leveling the
refrigerator.
When
the left
door is
lower
than the
right
doo_
Adjustment
point
Adjustment
point
[] If you open the freezer door, you can see
the center hinge.
[] Insert the supplied 4 mm Allen wrench into
the shaft of the center hinge.
When
the left
door is
higher
than the
right
doo_
[] LEVEL THE REFRIGERATOR
DOORS (cont.)
[] Adjust the height by turning clockwise
or counterclockwise, When you turn
counterclockwise, the door will move up.
[] After adjusting the doors, insert the supplied
fastener ring using a pair of pliers in the gap
between the hinge grommet and the center
hinge. The number of fastener rings you will
need to insert depends on the gap.
NOTE: Four fastener rings are enclosed with
the refrigerator. Thickness of each fastener ring
is 0.04".
22