Installation Instructions; Important - GE 26 Manual Del Propietario Y Instalación

Installation
Instructions
Refrigerator
GE Model 26
I Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com
In Canada, call 1.800.561.3344 or Visit our Website at: www.geappliances.ca
I
BEFORE YOU BEGIN
Read these instructions completely and carefully.
• IMPORTANT - Save these instructions for l ocal
inspector's use.
•
IMPORTANT
- Observe all governing codes and
ordinances.
• Note to Installer- Be sure to leave these instructions with
the Consumer.
• Note to Consumer- Keep these instructions for future
reference.
• Skill level - Installation of this appliance requiresbasic
mechanical skills.
• Completion time- Refrigerator Installation
20 minutes
Water Line Installation
30 minutes
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not covered
under the Warrantg.
PREPARATION
MOVING THE REFRIGERATOR INDOORS
If the refrigerator will not fit through a doorwag,
the refrigerator doors and freezer drawer can be removed.
• To remove the refrigerator door,see the Installing
the Refrigeratorsection.
• To remove the freezer drawer, see the Removing
the FreezerDrawer section.
WATER SUPPLY TO THE ICEMAKER AND DISPENSER
If the refrigerator has an icemaker, it will have to be
connected to a cold water line.AGE water supply kit
(containing tubing, shutoff valve,fittings and instructions)
is available at extra cost from your dealer,bg visiting our
Website at ge.com (in Canada at www.geappliances.ca)
or from Parts and Accessories,800.626.2002
(InCanada 1,888,261,3055),
TOOLS YOU MAY NEED
Adjustable Wrench
o@
/t
1/4 Outer D,ameter
Compression Nut
and Ferrule {sleeve)
i0 mm Socket
Ratchet!DriVer
Phillips-Head Screwdriver
3/32", 1/8/', 3/16" and
4 mm Allen Wrenches
1/8" Drill Bit and
Electric or Hand Drill
Pencil
Flat-Head Screwdriver
Tape Measure
1/4" Nut Driver
Pliers
Level
DIMENSIONS
Heightfrom
floorto hinge
covertop 68Ys"
Additional Dimensions