Electrical Connection (U.s.a. Only); Power Supply Cord - Whirlpool W10843728A Instrucciones De Instalación

Electrical Connection, 27" models (U.S.A. Only)

Power Supply Cord

Electrical Connection Options
1.
Choose electrical connection type
Power supply cord 4-wire receptacle
(NEMA Type 14-30R): Go to "4-Wire
Power Supply Cord Connection" section.
Then, go to "Venting Requirements."
Power supply cord 3-wire receptacle
(NEMA Type 10-30R): Go to "3-Wire
Power Supply Cord Connection" section.
Then go to "Venting Requirements."
4-wire direct connection: Go to "4-Wire
Direct Wire Connection" section. Then go
to "Venting Requirements."
3-wire direct connection: Go to "3-Wire
Direct Wire Connection" section. Then go
to "Venting Requirements."
NOTE:
If local codes do not permit connection of a
cabinet-ground conductor to neutral wire, go to "Optional
3-Wire Connection" section. This connection may be
used with either a power supply cord or a direct wire
connection.
14
Direct Wire
2.
Remove terminal block cover
B C
Before you start, disconnect power. Remove hold-down
screw (D) and terminal block cover (A).
A. Terminal block cover
B. External ground conductor screw
C. Center terminal block screw
D. Hold-down screw
E. Neutral ground wire
F. Hole below terminal block cover
D
A
E
F