Tabla de contenido
Publicidad
Installation Requirements
Tools and Parts
Gather required tools and parts before starting installation.
Tools needed:
Flat-blade screwdriver
Adjustable or open-end
wrench 9/16" (14 mm)
4" min
(102 mm)
Wood block
Tin snips (new vent
installations)
1/4" nut driver
(recommended)
Caulking gun and compound
(new vent installations)
4
#2 Phillips screwdriver
Level
Ruler or measuring tape
Adjustable wrench that
opens to 1" (25 mm) or
hex-head socket wrench
Wire stripper
Utility knife
Optional tools:
Flashlight
Parts supplied:
NOTE: Remove parts package from the washer basket.
Check that all parts were included.
Front leveling feet with
nuts (2) (27" models)
Rear leveling legs (2)
(24" models)
Plastic strap (24" models)
Silver double-wire hose clamp
Bucket
Front leveling legs (2)
(24" models)
Shipping strap (27" models)
(Not in parts bag. See
"Remove Shipping Strap.")
Drain hose
Publicidad
Tabla de contenido
