Promax TV EXPLORER HD ATSC Manual De Instrucciones página 11

USER'S MANUAL. TV EXPLORER
Shown on the frontal panel is the type of measurement that is being carried
(Terrestrial-Satellite/Analogue-Digital) and the data are presented on a hi-res 6.5" colour
graphic TFT transflective display with panoramic aspect ratio (16:9). The equipment
incorporates a light sensor that activates the contrast and luminosity of the display
according to the environmental conditions.
Furthermore the TV EXPLORER
modules (PC-Card) that allows the insertion of subscriber conditional access cards.
The TV EXPLORER
instrument can be held to the body with the carrying bag or transport belt, which at the
same time protects it from the rain. Because it is designed for outdoor use, it includes an
anti-shock protector that completely covers the instrument, and is supplied with a strong
transport case. As well, the front panel does not have any keys nor gaps to avoid
accidental water ingress.
The TV EXPLORER
different operating configurations. In this way it incorporates a specific function to
facilitate the alignment of antennas. When activating the alignment function the
instrument is set automatically to offer a fast spectrum sweep and a high sensitivity
graphical bar that allows fine adjust for the maximum signal. In addition it includes a
module for the powering of LNBs and DVB-T antennas to 5V, and the commands for
the programming of DiSEqC 1.2 and SatCR devices.
The TV EXPLORER
extend the available functions in the future. That means it can incorporate new benefits
without additional cost. For example, in the test of satellite signals distribution
networks, using combined with an IF generator permits to carry out an easy verification
of the installations before commissionning.
The spectrum analyser features with high accuracy, resolution, sensitivity and
sweep speed allows the instrument to be very useful for applications as the installation
of antennas. It presents an innovative control system based on four arrows, that makes
the use of the spectrum analyser very intuitive. The arrows allow adjusting the reference
level by steps of 10 or 5 dB and the frequency margin span on screen.
To enhance its convenience of use, it includes memories to store automatically
the different data acquisitions, i.e.: acquisition name, test points, frequency, channel
plan, etc.,. Moreover, the DATALOGGER function makes it much easier to test systems
in which a large number of measurements have to be made, and enables further
processing of all the information acquired using a computer system. The equipment is
able to generate automatic measurement reports and to update itself through Internet by
means of PkTools provided software.
The TV EXPLORER
corresponding to services from a digital channel. For it, the equipment uses an internal
memory of up to 1 GB.
12/2010
HD ATSC
HD ATSC comes with a conector for CAM
HD ATSC is an ideal size to hold with a hand. The
HD ATSC is designed to integrate measurements that require
HD ATSC can be updated to new software versions that
HD ATSC in addition, allows to record and to play a TS
Page 3