Automatic Transmission Search; Selecting The Measurement Configuration: Analogue/ Digital Signal - Promax TV EXPLORER HD ATSC Manual De Instrucciones

In frequency tuning mode there are two ways of tuning:
1. Turning the rotary selector
Turning the rotary selector
continuous from 5 to 1000 MHz and from 950 to 2150 MHz). When turning it
clockwise frequency increases while turning it anticlockwise frequency
decreases.
2. Using the keyboard.
Press the rotary selector
appear on the upper left corner of screen the keyboard symbol of manual data
entry
keyboard. The TV EXPLORER
closest to the entered value and then display it on-screen.
5.5

Automatic Transmission Search

Holding pressed the
tuning a channel the instrument tryes to identify it and save it with the configuration. If
the identification is not possible the channel is removed from list. As a result obtains a
new channel plan that only contains the channels that have been identified.
5.6

Selecting the measurement configuration: Analogue/ Digital signal

Measuring the characteristics of a channel depends, in the first place, on the type
of modulation: analogue or digital.
Use key
[17] key to show the measurements CONFIGURATION menu and select the
Signal option by turning and pressing the rotary selector
allows setting the type of signal to measure. When switching to a new type, the
TV EXPLORER HD
type of signal.
Page 30
), next enter the frequency value in MHz using the numeric
[25] key search starts over the active channel plan. When
[17] to switch between analogue and digital channels. Press the
ATSC activates the last measurement configuration used for that
USER'S MANUAL. TV EXPLORER
[1].
[1] selects the desired frequency (tuning is
[1] (the frequency listing will disappear and will
HD ATSC will calculate the tuneable frequency
HD ATSC
[1]. The Signal option
12/2010