Oster 3200 Manual De Instrucciones página 4

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

A
SSEMBLING
Clean Before First Use
A) Bowl, cover, food pusher, disk blade, french fry cutter, chopping blade
and dough blade:
THE BLADES ARE EXTREMELY SHARP.
USE CAUTION HANDLING BLADES.
Before you begin, PLEASE BE SURE THAT THE ELECTRIC CORD
IS UNPLUGGED.
1. Set food processor on a dry, level surface with the control buttons on
the motor housing to the front.
2. F
M
: 3200, 3212
OR
ODELS
Place the bowl without the cover with the handle left of switch panel over
the drive shaft on the motor base. Rotate the bowl until it drops down evenly
on the base. Hold handle and turn the bowl counterclockwise until it locks
firmly into position.The bowl handle will be positioned above the control
buttons.
F
M
: 3220
OR
ODEL
Place the bowl without the cover with the handle directly above the switch
panel over the drive shaft on the motor base. Rotate the bowl to the right
until it drops down evenly on the base. Hold handle and turn the bowl
counterclockwise until it locks firmly in place. The handle will be positioned
to the right, above the switch interlock platform.
NOTE: Each time you re-assemble your food processor, be sure to attach
the bowl first and lock it into position. Then, attach the cover.
3. Place the chopping blade or dough blade over the drive shaft, rotating it slightly
until it drops into place. Add the ingredients. THE BLADES ARE
EXTREMELY SHARP. USE CAUTION HANDLING BLADES.
4. F
M
: 3200, 3212
OR
ODELS
Attach the cover onto the bowl so that the food chute is on the
left side of the bowl. Turn counterclockwise until the cover locks into
place. The food chute will be directly above and in line with the handle.
F
M
: 3220
OR
ODEL
Attach the cover onto the bowl so that the food chute is in the front of the
bowl (above the switch panel). Turn counterclockwise until the cover locks
into place. The food chute will be directly above and in line with the handle.
5. Plug the power supply cord into an electrical outlet.
6. Start processing by selecting ON or PULSE and pressing the appropriate
touch-pad button.
B) Using the slicing/shredding disk and french fry disk attachments:
1. Place the blade shaft over the drive shaft rotating it slightly until it drops
into place.
Y
O
OUR
STER
English-3
F
P
®
OOD
ROCESSOR

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

32123220

Tabla de contenido