Activating Beeps (Beep); Setting Filtering (Fil) - Seca 674 Manual De Instrucciones Y Garantía

Activating beeps

Setting filtering (Fil)

72 •
1. Select the item "Ahold" from the menu.
2. Confirm your selection.
The current setting is displayed.
3. Select the desired setting:
4. Confirm your selection.
You exit the menu automatically.
You can set whether a beep is heard every time a key
is pressed and when a stable weight value is achieved.
(BEEP)
The latter is significant for the Hold/auto hold function.
1. Select the item "BEEP" from the menu.
2. Confirm your selection.
3. Select a menu item.
4. Confirm your selection.
The current setting is displayed.
5. Select the desired setting:
6. Confirm your selection.
You exit the menu automatically.
7. If you also want to activate beeps for the second
function, repeat the process.
Filtering (Fil) allows you to reduce interference (e.g. as a
result of patient movement) when determining weight.
1. Select the item "Fil" from the menu.
2. Confirm your selection.
The current setting is displayed.
– on
– off
NOTE
The "Beep when weight is stable" function is
activated at the factory. You can deactivate this
function if desired.
– Press: beep when key is pressed
– Hold: beep when weight value is stable.
– on
– off