Getting Started; Turning The System On - Alpine NVD-A802 Manual De Operación

Getting Started

Turning the System On

With this system, when the display monitor is set in the
navigation display mode or external input display mode and the
ignition key is turned to the ACC or ON positions, the opening
screen will automatically be displayed.
1
When the system is used for the first time,
both the language selection menu and
IMPORTANT! are displayed on the same
screen, touch the desired language.
Select (highlight) the desired language by tilting
the joystick and press ENTER.
After the language has been selected, important
information is displayed in each language.
Be sure to read the important information.
2
After you have read this important
information, touch [I Accept].
Select (highlight) "I Accept" by tilting the joystick
and press ENTER.
The Registration Notice screen is displayed.
3
After you have read this registration notice,
touch [Yes].
Select (highlight) "Yes" by tilting the joystick and
press ENTER.
The map screen is displayed.
• If there is no disc in the navigation system, "Please
insert DVD-ROM" is displayed. For details on how to
load the disc, see "Inserting the DVD-ROM" and
"Removing the DVD-ROM" in the navigation system's
Hardware Manual.
• If the disc cannot be read, the message "Error reading
DVD-ROM. Please check the disc." is displayed. Try
reloading the disk and if message does not go away,
consult an authorized Alpine dealer.
• If the monitor is kept on with the engine off for an
extended period of time, the vehicle's battery may
discharge.
9
-EN