Change Method - Alpine NVD-A802 Manual De Operación

2
Touch the desired category of place type.
Select (highlight) the desired category of place
type by tilting the joystick and press ENTER.
• For details on how to use the list, see page 11.
• When you select "Input Place Type," input a keyword
of place type and select Place Type.
• If more than one point of interest type exists, an icon is
displayed in front of point of interest type. If you
select the place type with
screen is displayed.
The Select Distance screen is displayed.
3
Touch the desired distance.
Select (highlight) the desired distance by tilting the
joystick and press ENTER.
The Select Place Name screen is displayed.
4
Touch the desired place name.
Select (highlight) the desired place name by tilting
the joystick and press ENTER.
The Confirm as Waypoint screen is displayed.
42
-EN
, the Select Place Type
5
Touch [OK to Proceed].
Select (highlight) "OK to Proceed" by tilting the
joystick and press ENTER.
The system begins calculating a new route.
• A map surrounding the searched POI is displayed by
selecting "Map."

Change Method

Change Method allows you to select the way the system
calculates the drive to your destination.
1
Touch [Change Method] on the route menu
screen.
Select (highlight) "Change Method" by tilting the
joystick and press ENTER.
The Select Method menu is displayed.
2
Touch the desired Method.
Select (highlight) the desired method by tilting the
joystick and press ENTER.
The system begins calculating a new route.
• For details of each Method, see page 32.
• Changing the method via the screen will be applied
only for the current destination. To change the method
permanently, refer to "Routing Method" (page 66).