Editing The Avoided Areas - Alpine NVD-A802 Manual De Operación

Editing the Avoided Areas

The area to be avoided can be changed or deleted.
For how to set an avoided area, refer to "Entering a Destination
by Scrolling Display Map" (page 29).
1
Touch [Avoided Areas] on the edit menu
screen.
Select (highlight) "Avoided Areas" by tilting the
joystick and press ENTER.
The Change/Delete Avoided Area screen is displayed.
2
Touch the desired avoid area.
Select (highlight) the desired avoid area by tilting
the joystick and press ENTER.
A surrounding map of the area to be avoided and its
sub-menu are displayed. The current avoided area is
highlighted on the map.
3
Touch [/] or [-] to select length or
[Delete], and then touch [1/2 mi], [1 mi],
[2mi] or [Delete].
Select (highlight) "1/2 mi", "1 mi", "2mi" or
"Delete" by tilting the joystick and press ENTER.
• Select 1/2 mi, 1 mi or 2 mi, as the area to be avoided.
The display returns to the Change/Delete Avoided Area
screen.
• If you select Delete, the confirmation dialog screen is
displayed. Go to step 4.
4
Touch [Yes].
Select (highlight) "Yes" by tilting the joystick and
press ENTER.
The avoided area is deleted.
55
-EN