Delete Destination; Delete Waypoint - Alpine NVD-A802 Manual De Operación

Delete Destination

This section explains how to delete a destination you have
previously set. Any waypoints for that destination will also be
deleted.
1
Touch [Delete Destination] on the route
menu screen.
Select (highlight) "Delete Destination" by tilting
the joystick and press ENTER.
The confirmation dialog screen appears.
2
Touch [Yes].
Select (highlight) "Yes" by tilting the joystick and
press ENTER.
The destination is deleted and the screen returns to
the current vehicle position. If a waypoint existed, then
both the destination and the waypoint are deleted.
• If the destination was from Today's Plan, then Today's
Plan guidance shall be canceled but destinations kept in
the Today's Plan list.
• A destination can also be deleted by the following
operation.
Touch Operation:
Touch [ ], then [Delete Destination].
Remote Control Operation:
Press DEL.DEST.

Delete Waypoint

This section explains how to delete all waypoints you have
previously set.
1
Touch [Delete Waypoint] on the route
menu screen.
Select (highlight) "Delete Waypoint" by tilting the
joystick and press ENTER.
The confirmation dialog screen appears.
2
Touch [Yes].
Select (highlight) "Yes" by tilting the joystick and
press ENTER.
The waypoint will be deleted. The system begins
calculating a new route.
• Waypoints can also be deleted by Touch Operation:
Touch [ ], then [Delete Waypoint].
43
-EN