Technical Data - Earlex Spraystation HV2901 Manual De Instrucciones

HV2901/3901/5901
Malfunction
Too much fog of
coating material
(Overspray)
Paint in the
ventilating hose*
Poor covering
capacity on the
wall
* Models - HV4500 and HV5500.

23. Technical Data

Power source
Power consumption
Double insulation
Air hose length
Weight
Cause
•
Distance to the object too large
•
Too much coating material applied,
material volume setting too high
•
Amount of air too high
•
Diaphragm soiled
•
Diaphragm defective
•
Spray material is too cold
•
Highly absorbent surface or paint
with poor covering capacity
•
Distance too large
Technical Data
230 V 50 Hz
~
600 W
4 m
3.4-5.1 kg
Remedy
➞ Reduce distance
➞ Alter material volume
adjuster
➞ Alter material volume
adjuster
➞ Clean the diaphragm
➞ Replace the diaphragm
➞ The material you are
spraying should be at
room temperature
➞ Cross spray (Fig. 8)
➞ Closer to the object
EN
13