Technical Data - EINHELL TE-CD 14,4-2 2B Li Manual De Instrucciones

4. Technical data

Voltage supply .....................................14,4 V d.c.
Idling speed: ............................0-310/0-1300 rpm
Torque settings: ........................................... 23+1
Forward and reverse rotation ..........................yes
Chuck clamping width ....................... max. 10 mm
Battery charger output voltage: ........14-21 V d. c.
Battery charger output current: .................... 1,9 A
Mains voltage for charger ........ 230-240 V ~ 50 Hz
Battery type: .......................................Lithium-ion
Number of battery cells: .................................... 4
Battery capacitance: ................................. 1.3 Ah
Weight.........................................................1.3 kg
Max. screw diameter: .................................. 6 mm
The maximum screw diameter indicates the ma-
ximum diameter of the screw that can be screwed
into wood. The screw diameter can vary depen-
ding on the type of wood.
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level ..................... 68,9 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ....................... 79,9 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Drilling in metal
Vibration emission value a
K uncertainty = 1.5 m/s
Screwing without hammer action
Vibration emission value a
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
Anl_TE_CD_14_4_2_2B_Li_SPK7.indb 19 Anl_TE_CD_14_4_2_2B_Li_SPK7.indb 19
≤ 2.5 m/s
2
h
2
≤ 2.5 m/s
2
h
2
- 19 -
GB
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
Limit the operating time.
All stages of the operating cycle must be conside-
red (for example, times in which the electric tools
are switched off and times in which the tool is
switched on but operates without load).
11.11.15 08:28 11.11.15 08:28