Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Toremove the sprinklerandreturnthe dishwasher to its
normal c ondition:
•
Turnthe sprinkler c ounterclockwise andremove it.
•
Retrieve thetop rack
•
Tiltthe rackupwards andpositionthe top rackrollers
ontothe rollerguides.
•
Continue pushing the top rackuntilthe rollers areon
the guide.
•
Push the rackintothe dishwasher allthe way.
Flip
Tines
The racks on select models consist of tines that you can
fold down or raise depending
on what you have to load
in the rack.
To fold down:
•
Grasp the tine near the locking mechanism.
•
Release from notch.
•
Push downwards.
RackMatic
TM
Adjustable Rack Height (select models)
The top rack can be raised or lowered
to accommodate
large items in either rack.
NOTE: Before you push the top rack into the dishwasher,
ensure that the rack height
is the same on both sides.
Otherwise, the dishwasher door will not shut and the top
rack spray arm will not connect to the water circuit.
To lower the top rack:
•
Pull the top rack out of the dishwasher
until it stops.
•
Press the
Rackmatic
Adjustable
top
rack handles
inward and let the rack drop.
To raise the top rack:
•
Pull the top rack out of the dishwasher
until it stops.
(It is easier to do so with the rack unloaded).
•
Grasp the top
of the
rack above
the
Rackmatic
Adjustable
top rack handles and pull it upward until
the handles lock the rack into position
(you do not
need to press the handles in order to raise the rack).
Manual Rack Height Adjustment
(select models)
Remove the empty rack by pulling it out of the dishwasher
to the
point
that
it can be lifted
upward,
as shown
below. Pull the rack outward
and up until the rollers are
completely
free of the roller guides.
Re-insert the rack with the other set of rollers on the roller
guides, as shown
below.
10
Publicidad
Capítulos
Tabla de contenido
