Hitachi NR65AK Manual De Instrucciones página 5

6. NEVER POINT TOOL AT YOURSELF OR OTHERS
IN WORK AREA.
Always assume the Nailer
contains fasteners.
Never point the Nailer at
yourself toward yourself or
others, whether it contains
fasteners or not.
If fasteners are mistakenly
driven, it can lead to severe
injuries.
Never engage in horseplay with
the Nailer.
Respect the Nailer as a working
implement.
7. KEEP FINGERS AWAY FROM TRIGGER WHEN
NOT DRIVING NAILS TO AVOID ACCIDENTAL
FIRING.
Never carry the Nailer with finger on trigger since you
could drive a fastener unintentionally and injure
yourself or someone else.
Always carry the Nailer by the handle only.
8. CHOICE OF TRIGGERING METHOD IS
IMPORTANT.
Please read and understand page 14 of "METHODS
OF OPERATION."
9. DO NOT EXCEED 120 psi. (8.3 bar 8.5 kgf/cm
Do not exceed maximum recommended air pressure
120 psi (8.3 bar 8.5 kgf/cm
Never connect the Nailer to pressure which potentially
exceeds 200 psi (13.7 bar 14 kgf/cm
burst.
10. ALWAYS WEAR EAR AND HEAD PROTECTION.
Always wear ear protection to protect your ears from
loud noise.
Always wear head protection to protect your head
from llying objects.
11. STORE NAILER PROPERLY.
When not in use, the Nailer should be stored in a dry
place. Keep out of reach of children. Lock the storage
area.
SAFETY
WARNING
2 )
2 ).
2 ) as the Nailer can
— 5 —
— Continued
12. KEEP WORK AREA CLEAN.
Cluttered areas invite injuries. Clear all work areas of
unnecessary tools, debris, furniture, etc.
13. NEVER USE IN PRESENCE OF FLAMMABLE
LIQUIDS OR GASES.
The Nailer produces sparks during operation.
Never use the Nailer in sites containing lacquer, paint,
benzine, thinner, gasoline, gases, adhesive agents, and
other materials which are combustible or explosive.
14. KEEP VISITORS AWAY.
Do not let visitors handle the Nailer.
All visitors should be kept safely away from work area.
15. DRESS PROPERLY.
Do not wear loose clothing or jewelry as they can be
caught in moving parts.
Rubber gloves and nonskid footwear are
recommended when working outdoors.
Wear protective hair covering to contain long hair.
16. NEVER USE NON RELIEVING COUPLER ON
NAILER.
If a non relieving coupler is used on the Nailer, the
Nailer can remain charged with air after disconnecting
and thus will be able to drive a nail even after
disconnecting.
The Nailer and air hose must have a hose coupling
such that all pressure is removed from the Nailer
when the coupling joint is disconnected.
17. CHECK PUSH LEVER BEFORE USE.
Make sure the push lever operates properly. (The push
lever may be called "Safety".) Never use the Nailer
unless the push lever is operating properly, otherwise
the Nailer could drive a fastener unexpectedly. Do not
tamper with or remove the push lever, otherwise the
push lever becomes inoperable.
18. KEEP ALL SCREWS AND COVERS TIGHTLY IN
PLACE.
Keep all screws and covers tightly mounted. Check
their condition periodically.
Never use the Nailer if parts are missing or damaged.
19. DO NOT LOAD NAILS WITH TRIGGER OR PUSH
LEVER DEPRESSED.
When loading nails into the Nailer or when connecting
the air hose,
1) do not depress the trigger;
2) do not depress the push lever; and
3) keep the Nailer pointed downward.
English