Nail Selection; Accessories; Standard Accessories; Optional Accessories - Hitachi NR65AK Manual De Instrucciones

NAIL SELECTION

Use only genuine HITACHI heat treated nails for this NR65AK to avoid serious injury from ricocheting nails. The
use of any other nails and non-heat treated nails could result in dangerous tool malfunction and/or nail
malfunction, causing serious injury.
Select adequate nail size to meet proper metal hardware requirement needed for application, designed by metal
hardware manufacturer and regulated by the applicable building code.
Only nails shown in the Table below can be driven with this Nailer.
Paper-collated strip nails
Full-head nails
(8d) .131×1-1/2" (3.3×38 mm)
(10d) .148×1-1/2" (3.8×38 mm)
(10d) .148×2-1/2" (3.8×64 mm)
(16d) .162×2-1/2" (4.1×64 mm)

ACCESSORIES

Accessories other than those shown below can lead to malfunction and resulting injuries.

STANDARD ACCESSORIES

OPTIONAL ACCESSORIES

Pneumatic Tool Lubricant
.8 oz. (25 cc) oil feeder
4 oz. (120 cc) oil feeder
1 quart (1 ltr) can
NOTE: Accessories are subject to change without any obligation on the part of HITACHI.
1
... sold separately
(Code No.877153)
(Code No.874042)
(Code No.876212)
WARNING
Min.
.280"
(7.1 mm)
.131"
(3.3 mm)
DANGER
1 Eye protector
— 9 —
English
Max.
.280"
(7.1 mm)
.162"
(4.1 mm)
1