Instruction Manual - Gardigo 60082 Manual De Instrucciones

SOLAR MOTION ACTIVATED
SPRINKLER ANIMAL REPELLER
Instruction manual
Art.-No. 60082
Dear client,
thank you for choosing one of our quality products. In the
following, we will explain the functions and operation of our
product. Please take the time to read through the instruc-
tions carefully. Please take some time to read through the
instructions carefully. Please note all the included safety and
operating instructions. Keep this manual safe and ensure
that you include it when passing on the product on to a third
party. If you have any questions or suggestions about this
product, please contact your supplier or our service team.
We would appreciate it if you would recommend us to others,
and we hope you enjoy using this unit.
1. How it works
Solar motion activate sprinkler repels deer, raccoons, rabbits,
dogs, cats, birds, possums and other animals from gardens,
lawns, pond and landscaped areas without hurting them.
When the unwanted animals enter into the PIR area, it will
sprinkle water through the cyclone nozzle and emit strong
flash light to repel them away. Works day and night without
chemicals, Safe and easy-to-use alternative to chemical re-
pellents and electric fences. Amorphous silicon solar powe-
red, 360 degree rotation detachable solar panel, eco-Friendly
and Low-Maintenance. 3 pieces AA NI-CD 800 mA rechargea-
ble batteries are included.
2. Specifications
• P roduction Area: Up to about 100 square meters
• W ater Usage per Activation: 2 – 3 cups
• S ensor Left-right Angle: 110 Degrees
• S prinkler Distance: Up to 10 m depends on water pressure
• A djustable Detection Range:
Protects up to about 100 square meters
• A djustable Sprinkler Angles: left/right and up/down
6
3. Delivery content
• Animal repeller (A)
• Solar panel (B)
• Sprinker head (C)
• Detachable bracket (D)
• Hose connector (E)
• 3 x AA Ni-MH rechargeable batteries, 800 mA
What you will need:
• Garden hose
• access to tap
4. A ssembly guide
1. Attach sprinkler head by head
to the top of Unit body by tur-
ning clockwise.
2. Open battery door and Install 3 x AA
rechargeable batteries in to the battry
case which is under unit body, then
screw the battery door back.
3. Install the solar panel onto the side of
the controller, and connect the power
cord plug into the socket on the under-
side of the device.
Status: 06/17