Ryobi P3650 Manual Del Operador página 16

 Loosen the fence lock knob and lift to remove the sliding
fence from the miter fence.
 Using the blade wrench provided, loosen the socket head
screws that secure the fixed miter fence to the base.
 Rotate the fixed miter fence left or right until the saw blade
is parallel with the square.
 Retighten the screws securely and recheck the blade-to-
fence alignment.
Your saw has several scale indicators. After squaring
adjustments have been made, it may be necessary to loosen
the indicator screws and reset them to zero. See Figures
20 - 21.
MITER
FIXED
TABLE
MITER
FENCE
VIEW OF BLADE NOT SQUARE WITH
FENCE, ADJUSTMENTS ARE REQUIRED
FIXED MITER
MITER TABLE
FENCE
VIEW OF BLADE NOT SQUARE WITH
FENCE, ADJUSTMENTS ARE REQUIRED
ASSEMBLY
BLADE
SQUARE
Fig. 16
BLADE
SQUARE
Fig. 17
FENCE
LOCK
KNOB
SLIDING
MITER FENCE
SOCKET HEAD
SCREW(S)
BEVEL
INDICATOR
LOCK KNOB
SCREW
16 − English
0˚ BEVEL
SLIDING
STOP PIN
MITER FENCE
SOCKET HEAD
FIXED
SCREW(S)
MITER
FENCE
SCALE
INDICATOR
BEVEL
SCALE
Fig. 18
Fig. 19
Fig. 20