Ryobi P3650 Manual Del Operador página 3

 NEVER START A TOOL WHEN ANY ROTATING COM-
PONENT IS IN CONTACT WITH THE WORKPIECE.
 DO NOT OPERATE A TOOL WHILE UNDER THE IN-
FLUENCE OF DRUGS, ALCOHOL, OR ANY MEDICA-
TION.
 WHEN SERVICING use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
 USE ONLY RECOMMENDED ACCESSORIES listed in
this manual or addendums. Use of accessories that are
not listed may cause the risk of personal injury. Instruc-
tions for safe use of accessories are included with the
accessory.
 DOUBLE CHECK ALL SETUPS. Make sure blade is tight
and not making contact with saw or workpiece before
connecting to power supply.
 ENSURE THE SWITCH IS IN THE OFF POSITION
BEFORE INSERTING BATTERY PACKS. Inserting the
battery pack into power tools that have the switch on
invites accidents.
 RECHARGE ONLY WITH THE CHARGER SPECIFIED
BY THE MANUFACTURER. A charger that is suitable for
one type of battery pack may create a risk of fire when
used with another battery pack.
 USE POWER TOOLS ONLY WITH SPECIFICALLY DES-
IGNATED BATTERY PACKS. Use of any other battery
pack may create a risk of injury or fire.
GENERAL SAFETY RULES
3 − English
 FOR USE WITH 18 V NICKEL-CADMIUM AND 18 V
LITHIUM-ION BATTERY PACKS, see tool/appliance/
battery pack/charger correlation supplement 987000-
432.
 WHEN BATTERY PACK IS NOT IN USE, KEEP IT AWAY
FROM OTHER METAL OBJECTS LIKE PAPER CLIPS,
COINS, KEYS, NAILS, SCREWS, OR OTHER SMALL
METAL OBJECTS THAT CAN MAKE A CONNECTION
FROM ONE TERMINAL TO ANOTHER. Shorting the
battery terminals together may cause burns or a fire.
 UNDER ABUSIVE CONDITIONS, LIQUID MAY BE
EJECTED FROM THE BATTERY; AVOID CONTACT.
IF CONTACT ACCIDENTALLY OCCURS, FLUSH WITH
WATER. IF LIQUID CONTACTS EYES, ADDITIONALLY
SEEK MEDICAL HELP. Liquid ejected from the battery
may cause irritation or burns.
 DISCONNECT BATTERY PACKS FROM TOOL OR
PLACE THE SWITCH IN THE LOCKED OR OFF
POSITION BEFORE MAKING ANY ADJUSTMENTS,
CHANGING ACCESSORIES, OR STORING THE TOOL.
Such preventive safety measures reduce the risk of start-
ing the tool accidentally.
 TOOL SERVICE MUST BE PERFORMED ONLY BY
QUALIFIED REPAIR PERSONNEL using only identical
replacement parts. This will ensure that the safety of the
power tool is maintained.