FireClass FC501 Guía Rápida De Instalación página 21

Fc501 Panel
4=Save PROG 5=FW Upgrade
Types of activities
USB
CORRUPTED FILE
Figure 7 - The scheme in the figure displays the LCD pages sequence required by this feature: "Language strings
download during panel run time".
■
How to load a language from the USB stick
The languages in the USB stick connected to the
Panel have been previously downloaded from the CD
supplied with the panel or from the FireClass website.
Procedure while the panel is running
Press 1 – PROGRAM (enter the Installer pass-
1.
word)
Press 7 - USB
2.
Press 0 - EXTRA (see scheme on Figure 7).
3.
In reference to point 3) "EXTRA", at the first panel
power-up and/or at the end of the FW upgrade pro-
cess, only a language can be loaded overwriting the
second languages previously present (the first will be
English). The available language will be contained in a
file in a dedicated folder on a USB stick connected to
the control panel before first Power up. This loaded
language will be the language of the control panel. If
the USB stick is not present at the first panel power-
up, the system will propose the default languages:
Italian and English.
In the case of a firmware UPGRADE of the control
panel, at the end of the FW upgrade process, the
panel will start the procedure "Language strings down-
load via USB key at the first panel power-up", (see
figure 8) in order to allow you to load the correct lan-
guage again.
ENGLISH
If blinking
Panel Status the panel works
properly
access level
lev.3 : PROGRAM
6=Save LOG
FC501
FAILED
Quick‐Start Setup Guide
Fc501 Panel
1=load first lang.
2=load second lang.
Choice of Language
ESC
USB File
TROUBLE
USB
FRANCAIS
ESPANOL
PORTUGUESE
ESC
Go to select language
LANGUAGE LIST WAITING PAGE
List of languages In the USB
memory stick
USB
FRANCAIS
ESPANOL
PORTUGUESE
Go to the native
languages ESC
selection page
USB
ESPANOL
Figure 8 - This figure displays the LCD page se-
quence required by feature: "Language strings down-
load via USB key at the first panel power-up" (USB
memory stick inserted and correct language file pre-
sent).
PAGE for
SELECT THE LANGUAGE
lev.3 : PROGRAM
2
1
DEF
ABC
o
Gathering information
RUNNING
wait please
USB File
OK
FC501
>>> [ ESPANOL
to change page
POWER ON
_
_ _
_ _
_ _
_ _
_
_
_
Animation
FC501
>>> [ ESPANOL
FC501
>>> [ ESPA------- ]
40%
NOTE: at the end of this process the initial
configuration steps (front page) will continue.
If the language strings transfer process, from
USB to panel, fails a fault page is displayed
and the native Italian language is restored
]
ESC
]
21