Technical Data; Accessory Tools - Permissible Diameters - Hilti SF 4-A22 Manual De Instrucciones

Status
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
1 LED flashes, the power tool is not
in working order.
4 LEDs flash, the power tool is not
in working order.
Battery state of charge cannot be displayed while the control switch is
pressed and for up to 5 seconds after releasing the control switch.
If the battery display LEDs blink, please observe the instructions given
in the Troubleshooting section.
4

Technical data

4.1 Technical data
Rated voltage
Weight in accordance with EPTA Procedure
01 including B22⁄8.0 battery
Speed
Torque (soft joint)
Ambient temperature for operation
Storage temperature
4.2 Accessory tools – permissible diameters
Keyless chuck clamping range
Ø drill bit (softwood)
Ø drill bit (hardwood)
Ø drill bit (metal)
4.3 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
26 English
Meaning
State of charge: 50 % to 75 %
State of charge: 25 % to 50 %
State of charge: 10 % to 25 %
State of charge: < 10 %
The battery has overheated or is
completely discharged.
The power tool is overloaded or has
overheated.
SF 4-A22
21.6 V
2.4 kg
1st gear 0 /min ... 610 /min
2nd gear 0 /min ... 2,100 /min
≤ 36 Nm
−17 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
SF 4-A22
1.5 mm ... 13 mm
1.5 mm ... 25 mm
1.5 mm ... 14 mm
1.5 mm ... 10 mm
21.6 V
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
2253604
*2253604*