Items Supplied; Technical Data; Impact Wrench - Hilti SID 4­A22 Manual De Instrucciones Original

Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
Battery charge state cannot be displayed while the control switch is
pressed and for up to 5 seconds after releasing the control switch.

3.4 Items supplied

Impact screwdriver, operating instructions.
Other system products approved for use with this product can be found
at your local Hilti Store or at: www.hilti.group
4

Technical data

4.1 Impact wrench

Rated voltage
Weight in accordance with EPTA procedure
01/2003
Rated speed under no load
Impact speed
Torque adjustment
Large standard bolts
Large high-strength bolts
Socket/bit drive
Storage temperature
Ambient temperature for operation
4.2 Noise information and vibration values in accordance with EN
62841
The sound pressure and vibration values given in these instructions were
measured in accordance with a standardized test and can be used to
compare one power tool with another.
preliminary assessment of exposure.
24 English
Printed: 14.10.2019 | Doc-Nr: PUB / 5293888 / 000 / 06
Meaning
Charge state: 75 % to 100 %
Charge state: 50 % to 75 %
Charge state: 25 % to 50 %
Charge state: 10 % to 25 %
Charge state: < 10 %
21.6 V
2.5 kg
Setting I 0 /min ... 1,000 /min
Setting II 0 /min ... 1,500 /min
Setting III 0 /min ... 2,700 /min
≤ 3,500 bpm
3 settings
M8 to M16
M6 to M12
/ " hex. socket with
1
4
locking ring
−20 ℃ ... 70 ℃
−17 ℃ ... 60 ℃
They can also be used for a
2145524
*2145524*