Intended Use; Items Supplied - Hilti SID 8-A18 Manual De Instrucciones Original

Battery
(
Charge status and fault dis-
)
play (Li-ion battery)

3.2 Intended use

The product described is a hand-held cordless impact screwdriver. It is
designed for tightening and releasing nuts, bolts and anchors and for driving
wood screws. It is fitted with a chuck of the hex. socket type with locking
sleeve.
The product described should not be used for applications that require a
precise torque. If the power tool is used for applications that require a
specific torque, or where a certain maximum torque must not be exceeded,
there is a risk of over-tightening and damage to the screw or workpiece. To
prevent over-tightening in these types of application, use a tool that allows
specific preset torque settings to be made.
The product described is designed for professional use and may be operated,
serviced and maintained only by trained, authorized personnel. This person-
nel must be informed of any particular hazards that may be encountered.
The impact screwdriver and its ancillary equipment may present hazards
when used incorrectly by untrained personnel or when used not as directed.
▶ Do not use the battery as a power source for other unspecified appliances.
▶ Observe the national health and safety requirements.
▶ To reduce the risk of injury, use only genuine Hilti tools and accessories.
▶ To power the impact screwdriver, use a rechargeable battery of a type
approved by Hilti and a charger from the C4/36 series.

3.3 Items supplied

Impact screwdriver, operating instructions.
Note
Approved accessories and consumables can be found at your Hilti
Center or at www.hilti.com.
3.4 Li­ion battery display
When the Li-ion battery is in use, the charge status can be displayed by
tapping one of the battery release buttons.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks, the power tool is
ready for use.
Printed: 20.05.2015 | Doc-Nr: PUB / 5230969 / 000 / 00
Release button with additional
+
function (charge status display
activation)
Meaning
• Charge status: 75 % to 100 %
• Charge status: 50 % to 75 %
• Charge status: 25 % to 50 %
• Charge status: 10 % to 25 %
• Charge status: < 10 %
7