Safety Precautions; Caution Labels - Epson TM-T70 Manual Del Usuario

Ocultar thumbs Ver también para TM-T70:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37

Safety Precautions

This section describes the warnings and cautions intended to ensure safe and
effective use of the TM-T70. Other warnings and cautions on handling of this
product for its safe and effective use are described in other sections of the manual.
WARNING:
If the TM-T70 produces smoke, a strange odor, or unusual noise, shut down the
TM-T70, unplug the power cable immediately, and then contact your dealer or
an Epson service center for advice. Continued use may lead to fire or electric
shock.
Never attempt to repair this product yourself. Improper repair work can be
dangerous.
Never disassemble or modify this product. Tampering with this product may
result in injury or fire.
Be sure to use the specified power source. Connection to an improper power
source may cause fire.
Do not allow foreign matter to fall into the equipment. Penetration by foreign
objects may lead to fire.
If water or other liquid spills into this equipment, shut down the TM-T70, unplug
the power cable of the TM-T70 immediately, and then contact your dealer or
an Epson service center for advice. Continued use may lead to fire or shock.
If you open the DIP switch cover, be sure to close the cover and tighten the
screw after adjusting the DIP switch. Using this product with the cover open
may cause fire or electric shock.
CAUTION:
Do not connect cables in ways other than those mentioned in this manual.
Different connections may cause equipment damage or fire.
Be sure to set this equipment on a firm, stable, horizontal surface. The product
may break or cause injury if it falls.
Do not use this product in locations subject to high humidity or dust levels.
Excessive humidity and dust may cause equipment damage or fire.
Do not place heavy objects on top of this product. Never stand or lean on this
product. Equipment may fall or collapse, causing breakage and possible injury.
To ensure safety, unplug this product before leaving it unused for an extended
period.
Before moving this product, be sure to unplug it and all the cables connected
to it.
Do not use aerosol sprayers containing flammable gas inside or around this
product. Doing so may cause fire.

Caution Labels

CAUTION:
The thermal head can be very hot during printing and immediately after
printing. Toutching it may cause burns. Be sure to do cleaning and other work
after the thermal head cools down. See illustration A for the location of the
thermal head.
English
TM-T70 User's Manual 3

Publicidad

Tabla de contenido
loading

Tabla de contenido