Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
7.4
Set the operator prefix code
When you have subscribed at an alternative oper-
ator it sometimes is required to dial a prefix in front
of the telephone number.
When entering the prefix, the phone will automat-
ically add the prefix in front of the dialled number.
For example:
Operator prefix: 1234
Number to be dialled : 012345678
Number dialled by the phone: 1234012345678
•
Press
to enter the menu
•
Use
/
to select "
•
Press
to enter the settings
•
Use
/
to select "ON" or "OFF"
•
Press
•
Enter the prefix
•
Press
•
Press
to exit the menu
7.5
Set the alarm
You can set a wakeup alarm in the telephone.
•
Press
to enter the menu
•
Use
/
to select "
•
Press
to enter the settings
•
Use
/
to change the digit
•
Press
to move to the next digit
•
Finally use
/
•
Press
to exit the menu
7.6
Set the flash time
The R-key (flash) is used for services like "Call
waiting" (if this service is provided by your tele-
phone company) or to transfer calls when the tel-
ephone is connected to a PBX-system.
Depending on the country, this flash-time can be
different.
The telephone supports 4 possibilities : 110, 300,
600 and 1000 msec.
•
Press
to enter the menu
•
Use
/
to select "
•
Press
to enter the settings
•
Use
/
to select
Topcom Allure 400
DXW2 S
"
$/HUW
"
to select "ON" or "OFF"
)/DVK
"
•
Press
to exit the menu
7.7
Ringer volume
At the back panel of the telephone you find a
switch
that can set three different ring vol-
umes. Choose the most comfortable volume.
7.8
Hands-free volume
At the back panel of the telephone you find a
switch
that can set three different hands-
free volumes. Choose the most suitable volume
for your use.
7.9
Set the ring tone
There are 20 different ring tones to choose from.
•
Press
. The current ringtone can be
heard at the highest volume
•
Use
/
to select
•
After 5 seconds the telephone will go back to
idle position
7.10
Set the LCD display contrast
There are 5 LCD contrast levels.
R/ LCD
•
Press
to choose the most suitable
contrast level
•
After 5 seconds the telephone will go back to
idle position
8
Operation
8.1
Making a call
•
Enter the telephone number
•
Press
to delete a wrongly entered digit
•
Pick up the handset or press
hands-free call
During a call made with the handset you can
switch to hands-free by pressing
up the handset.
In case the telephone is connected to a PBX sys-
tem it might be necessary to add a pause after the
PBX access code. The phone can generate a 4
second pause time.
For example:
0 P 012345678
P/ VIP
Press
to enter a pause
Topcom Allure 400
to make a
and hanging
5
Publicidad
Tabla de contenido
