Fitting The Collecting Bin; Fitting The Battery - pellenc Rasion Easy Guia Del Usuario

TOOL PREPARATION
- Lock the two adjusting levers (8) to lock the handlebar
in the desired position (six positions are shown on
clamping nut, detail A).
- Adjust the tightness with the knob (detail B).
To be able to easily manoeuvre your lawn mower, chose a comfortable and agreeable working
position to suit your morphology.

FITTING THE COLLECTING BIN

The lawn mower works like a vacuum cleaner that throws the cut grass into the collecting
bin. Ensure that you always empty the collecting bin before it is full to avoid impairing the
performance. Overloading the bag may damage it. Before attaching the collecting bin to the
lawn mower, always check it for holes, tears or damage.
- Lift the ejection flap (9) and slide the collecting bin (18)
in the notches located at the rear of the lawn mower.
Always check that the collecting bin is correctly attached to the lawn mower before you
begin mowing.

FITTING THE BATTERY

- Check the charge of the battery (20) before use.
Recharge the battery, when necessary, using the
charger (19) provided with the battery.
- Slide the battery (20) from the front as far as the upper
hooks on the battery support (12).
- Release the back of the battery to position it
horizontally on the support.
- Push the lower hooks on the support until they clip
onto the battery.
- Check that the battery is completely locked on the
support.
CAUTION: Only batteries with a red connector can be used with the lawn mower.
9
12
11
8
18
20