Beta ALP 125 Manual De Instrucciones página 129

L
I
ALP200
M
O
N
P
Replacing the front sprocket
A description of the procedure for repla-
cing the front chain sprocket is provided
for information purposes only. The opera-
tion should always be performed by an
authorized BETAMOTOR dealer.
• - Turn the wheel until it reaches the stop,
while loosening the nuts I (on both sides)
and the chain adjusters L, so as to be
able to loosen the chain.
• Remove the three chain guard fixing
ALP125
screws F (2 screws for ALP125 mod-
els).
• Remove the chain from the sprocket.
• Engage first gear and loosen the pin-
ion-fixing nut N anticlockwise for the
ALP200, and the two clamps P for the
ALP125.
• Replace the sprocket O.
M
• To reassemble, follow the same proce-
dure in reverse order.
ALP200
Note:
We recommend replacing the front
sprocket along with the whole drive unit.
ALP125
55
3
GB