Tensioning The Chain - Beta ALP 125 Manual De Instrucciones

C
A
B
20 mm

TENSIONING THE CHAIN

To ensure the drive chain a longer life, it
is advisable to periodically check its ten-
sion.
Always maintain the chain clean and lu-
bricated.
If the chain play exceeds 20 mm, ten-
sion the chain by following these steps:
•Loosen the nuts A on both branches of
the fork.
•Loosen the nut B on both branches of
the fork.
•Turn the nut C until the chain is properly
stretched.
•Do the same with the nut C, which is on
the other branch of the fork, until the
wheel is perfectly aligned.
•Tighten the nuts B and A on both
branches of the fork.
63
4
GB