STARTER
The starter is used to start the motorbike
more easily even when the engine is
cold; to use this device, proceed as
follow:
• Pull out starting device knob D, located
on the left side of the carburettor, until
the second click is heard.
• On ALP125 models, starter lever D
can only be operated after pressing it
inwards.
• Wait about 2 minutes to warm up the
engine, without turning the gas grip,
then bring the starter D to the initial
position.
SHUTTING OFF THE ENGINE
• While the vehicle is stationary and in
neutral gear, rotate the ignition key to
the "OFF" position.
• Before stopping the engine after a long
ride, it is advisable to let it idle for a
few moments.
• With the engine off, turn the fuel tap
to CLOSED.
D
Open
Closed
39
2
ALP200
ALP125
D
Reservoir
GB