LEGRAND 430 522 Manual De Usuario página 24

MAIN PART DESCRIPTION
• Dome Cover
Do not detach the protection vinyl from the dome cover before finishing all the installation process to protect
the dome cover from scratches or dust.
• Terminal Cover
This is used to install the camera directly on the ceiling or attach to the other brackets such as in-ceiling,
ceiling and wall mount. After separating this cover first and then attach this directly to ceiling or to the other
bracket. Camera must be assembled at the last stage.
• Drop Prevention Spring - Drop Prevention Hook
This part keeps the camera from dropping during installation and maintenance.
After install the Terminal Cover, please, hang the spring to the drop prevention hook of main body as shown
in picture for further tasks
• Lockup Screw
After assembling Terminal Cover to main body, screw Terminal Cover to main body to protect them from
separation by vibration and so on.
• Fuse
If the fuse is burnt to protect your came from over-current damage, the fuse have to be replace with new one.
The fuse specification is 250V 2A. However, we recommend consulting with supplier to remove the cause of
over-current.
• Cabling Terminal Block
During installation, Power, Video, Communication, Alarm I/O cables are connected on to this cabling terminal
block.
24