LEGRAND 430 522 Manual De Usuario página 30

INSTALLATION USING REF . 430 596 IN-CEILING MOUNT BRACKET
a Cut the panel of ceiling as shown bellow.
c Locate the summit of the plate spring at the arrow
mark as shown in the dotted cir
e Screw camera to ceiling tex with 3 screws tightly.
b Assemble Terminal Cover of camera to the In-
Ceiling Mount Bracket as shown bellow.
d Assemble main body to Terminal Cover and insert
the assembly into ceiling tex.
Holes are to be used to sustain the device.
$ f Assemble Deco. Ring with camera and turn Deco.
$
Ring on its axis in CW(Clockwise) direction.
$
$
30