Bosch PL2632 Instrucciones De Funcionamiento página 9

2610052960.qxp_PL2632 7/17/19 8:53 AM Page 9
TABS (3x)
▶ Setting The Desired Planing
Width
1. Loosen the wing knob(s) that hold
the fence onto the brackets guide
bracket(s).
2. Slide the fence along the guide
bracket(s) to the desired planing
width. (When using the dual-mount
fence, it may be necessary to raise
the planer stand before the desired
width can be reached.)
3. Securely tighten wing knobs.
SHAVINgS
BAg
Assembly
Fig. 2a
PLASTIC
OVERSHOE
DUAL-MOUNT
gUIDE FENCE
35mm hose
Bosch VX120
VH-series hose
1¼ hose VAC002
1½ hose VAC024
2½ hose VAC020
▶ Shavings Extraction
The PL2632 planer comes with two
shavings exhaust ports. Moving the port
selector lever to position 1 (towards
front of tool) discharges shavings to the
left, while position 2 (towards rear of
tool) discharges shavings to the right.
(Fig. 1).
The planer shavings exhaust port may
be used with an optional shavings bag
or a shop vacuum and vacuum
connector (Fig. 3) to keep your work
environment cleaner.
Bosch offers several different vacuum
hoses that will connect these tools to
Bosch vacuum cleaners. The optional
Bosch VAC002 or VAC024 adapters will
connect the planer to 1-1/4" and 1-1/2"
vacuum hoses, and the optional VAC020
will connect the planer to 2-1/2" hoses.
The vacuum cleaner must be suitable
for the material being worked.
When vacuuming dry dust that is
especially detrimental to health or
carcinogenic, use a special vacuum
cleaner / dust extractor.
Fig. 3
SHAVINgS
EXHAUST
PORT
-9-