Description Of The Components - Zhermack DE 1 Manual De Usuario

CHAPTER 3: DESCRIPTION OF THE EQUIPMENT
GENERAL DESCRIPTION OF THE EQUIPMENT
3.1
The DE series ovens ( versions DE 1, DE 2, DE 3) have been designed to fire and/or melt the lining
cylinders used in odontotechny. The DE series ovens allow the user to program a 2-stage work cycle
in which each stage consists of three parameters:
- temperature.
- temperature increase rate.
- stabilisation time.
TABLE OF THE COMPONENTS
3.2

3.2.1 Description of the components

A. Ceramic air bleeder
B. Door open/close handle
C. Magnetic closure
D. Control panel (see section 3.3)
120 of 260
MAINTENANCE AND USE MANUAL
EN
E. Main switch
F. Door microswitch
G. Oven chamber door
H. Power lead
I. Fuses
FURNACE DE 1 / DE 2 / DE 3