Remote Control - Danby DPA120BEUWDB Manual Del Propietário

OPERATING INSTRUCTIONS

REMOTE CONTROL

1. Power Button: Press to turn the unit on or off.
2. Mode Button: Press to select the desired mode.
3. Fan Button: Press to select fan speed.
4. Sleep/Filter Button:
• Press to start the Sleep function.
• The fi lter light will illuminate after 250 hours of
use as a reminder to clean the fi lter; to reset the
fi lter after cleaning, hold the Sleep button for 3
seconds.
5. Swing Button: Press to start the auto swing
feature. When auto swing is activated, press
again to stop the louver at the desired angle.
6. LED Button: Press to turn the LED display on or
off.
7. Timer Off Button: Press to set the Auto-off timer.
8. Timer On Button: Press to set the Auto-on timer.
9. Shortcut Button: Press to set and activate the
short cut function.
10. Up and Down Buttons:
• Used to set the temperature and timer.
• Press and hold both Up and Down buttons for 3
seconds to change the temperature display from
°C to °F.
11. LED Display:
• Shows the set temperature in °C or °F or the
auto-timer settings.
• While on Dry mode shows the relative humidity.
• When on Fan mode shows the room
temperature.
1
2
3
4 5
9
11
9
10
8
7
6