Technical Data; General Description - Royal Catering RCSS-5 ECO Manual De Instrucciones

TECHNICAL DATA

Parameter description Parameter value
Product name Chocolate Machine
Model RCSS-5 ECO RCSS-10 ECO
Rated voltage [V~]/ 230/50
frequency [Hz]
Rated power [W] 440 (400 heating/40 motor)
Protection class I
Temperature range [°C] 30÷90
Working mode [h] 8÷12
Capacity [l] 5 10
Weight [ kg] 6 7

1. GENERAL DESCRIPTION

The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
a trouble-free operation, use it in accordance with this user
manual and regularly perform the maintenance tasks. The
technical data and specifications in this user manual are up to
date. The manufacturer reserves the right to make changes
associated with quality improvement. Taking into account
technological progress and noise reduction opportunities,
the device was designed to reduce noise emission risks to
the minimum.
Legend
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
Only use inside.
Attention! Hot surface, risk of burns.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details they
may differ from the actual machine.
The original operation manual is in German. Other
language versions are translations from German.
2. Usage safety
Electrical equipment:
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or even death.
6
U S E R M A N U A L
Whenever „device" or „product" are used in the warnings
and instructions, it shall mean Chocolate Machine. Do not
use in very humid environments or in the direct vicinity of
water tanks. Prevent the device from getting wet. Risk of
electric shock!
3.1 Electrical safety
a) The plug has to fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b) Use the cable only in accordance with its designated
use. Never use it to carry the device or to pull the
plug out of a socket. Keep the cable away from heat
sources, oil, sharp edges or moving parts. Damaged
or tangled cables increase the risk of electric shock.
3.2 Safety at the workplace
a) Do not use the device in an explosion hazard zone,
for example in the presence of flammable liquids,
gasses or dust. The device generates sparks which
may ignite dust or fumes.
b) Upon discovering damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
and
c) If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
d) Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
e) If a fire starts, use solely powder or carbon dioxide
(CO ) fire extinguishers suitable for use on live
2
devices to put it out.
3.3 Personal safety
a) Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b) To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
3.4 Safe device use
a) Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and have to be repaired.
b) When not in use, store in a safe place, away from
children and people not familiar with the device,
who have not read the user manual. The device may
pose a hazard in the hands of inexperienced users.
c) Maintain the device in a good technical state. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
d) Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
e) To ensure the operational integrity of the device, do
not remove factory fitted guards and do not loosen
any screws.
Rev. 24.04.2018
f) Avoid situations where the device halts during
use due to excessive loading. This may result in
overheating of the drive elements and device
damage.
g) The work surface should be level, dry and heat
resistant.
4. Use guidelines
The chocolate machine is designed to heat and maintain
the temperature of chocolate and chocolate drinks.
The user is liable for any damage resulting from
nonintended use of the device.
4.1 Device description
12
11
1
10
2
9
3
4
8
5
6
7
1. Mixer axle
2. Heating surface
3. mounting bracket of the container
4. Housing
5. Display
6. On/Off switch
7. drainer
8. Tap
9. trigger lever
10. mixer
11. container
12. Lid
Description of the display (5)
13 14
16 15
13. Heating and mixing On/Off button
14. Mixing function diode
15. Heating temperature adjustment button
16. Heating function diode
4.2 Preparing for use/Device use
Operation
Before the first use, remove all elements and clean them
along with the entire device.
Device use:
• Prepare your favourite drink according
manufacturer recommendations.
Rev. 24.04.2018
• Remove the lid (12) from the device.
• Pour drinks into the container (11). Do not exceed
the maximum fill level.
• Close the lid.
• To activate the device press button (6).
• To activate the drink mixer press button (13). Diode
(14) will come on.
• To activate the heating process press button (13). (...)
button (15) to set the heating temperature.
Attention! It is not possible to activate heating only.
Heating can solely be on together with the mixing.
• After reaching the appropriate temperature, place
a cup under the drain cock (8) and press it. The drink
will be poured from the container.
PLEASE NOTE! The drinks may be very hot, pay
attention to the risk of burns.
• To turn off mixing and heating, press and hold
button (13) until diodes (14) and (16) go off.
• After use press button (6) to switch the device off.
• If not in use for an extended period of time, remove
drink remains from the container and clean all
elements which were in contact with the drink.
4.3 Cleaning and maintenance
• Before cleaning, maintenance and when not in use,
make sure the power cable is disconnected and the
device has cooled down.
• Use cleaners without corrosive substances to clean
each surface.
• Disassembling device elements.
Attention! Always empty the contents of the
container before commencing cleaning.
1 2 3
4 5 6
7 8
1. Remove the lid.
2. Raise the mixer
3. Tilt the mixer to remove it from the axle.
4. Remove mounting brackets.
5. Use both hands to carefully remove the container
whilst holding the mixer axle.
6. Remove the container and lay it on a flat and stable
surface.
7. Remove the seal from the container.
8. Remove the shaft of the mixer by turning it.
The elements removed in the manner described above are
ready for cleaning and disinfection.
The assembly of cleaned and disinfected elements is done
in reversed order. When doing it, pay attention to the
to
following:
7