Traction Release Lever; Maintenance Summary Table - Grillo CL 75 Manual De Instrucciones

TRACTION RELEASE LEVER

The traction release device is located at the back of the machine under the rear frame (fig. 1, no. 16); if
the machine breaks down, to allow it to be towed or moved by hand, move the lever to idle position. In
the internal position the machine is in neutral position.
PROCEDURE
Engine oil
Air filter
Spark plug
P.T.O belt
Check that:
-engine intake grid is clean
-hydraulic engine cooling fins are clean
Hydrostatic
transmission
oil
Check that blades are well-sharpened and
well-fixed
Lubricate with grease
● recommended procedure
‫ ٭‬procedure to be carried out if necessary
CL75/ Translation of the original instructions

MAINTENANCE SUMMARY TABLE

check the level
change
check
replace
check/adjust
replace
check tension
replace
check the level
replace
AT AFTER EVERY 50
EACH 20
USE HOURS
●
●
●
●
●
●
●
12
EVERY
HOURS 100
HOURS
●
●
●
●
●
(first time
only)
●
●
EVERY 200
HOURS
‫٭‬
●
‫٭‬
●