Problem With Results - Bosch TASSIMO style TAS110 Serie Instrucciones De Uso

Fault
LED flashes.
LED lights up even
though decalcified water has
been used.
LED and
simultaneously lit and the
brewing process is not pos-
sible.
LED and LED flash
simultaneously.

Problem with results

Fault
Crema has deteriorated.
Drink volume has changed.
Drink volume has reduced.
Drink dispensing halts.
Cause
Heavy build-up of limescale
in the appliance.
Decalcified water still con-
tains small amounts of lime.
Appliance has a fault.
LED are
Descaling process is run-
ning.
Cause
Beverage outlet is soiled.
Build-up of limescale in the
appliance.
Build-up of limescale in the
appliance.
Water tank has not been suf-
ficiently filled.
Troubleshooting en
troubleshooting
Descale the appliance.
▶
→ "Descale the appliance",
Page 31
Descale the appliance.
▶
→ "Descale the appliance",
Page 31
Unplug the mains plug.
1.
Contact the TASSIMO careline.
2.
Wait until the descaling process is
▶
complete.
troubleshooting
Clean the beverage outlet.
▶
→ "Cleaning and servicing",
Page 31
Clean the brewing unit with the
▶
T DISC.
→ "Cleaning and servicing",
Page 31
Descale the appliance.
▶
→ "Descale the appliance",
Page 31
Descale the appliance.
▶
→ "Descale the appliance",
Page 31
Fill the water tank with fresh, cold
1.
water up to the mark
Keep pressed until the desired
2.
fill volume is reached.
⁠ .
35