Technical Data - Royal Catering RCBD-5L Manual De Instrucciones

Einfüllen von Wasser zwecks Kühlung:
Ersetzen Sie einmal pro Woche das Wasser in dem Gerät.
Um Wasser aus dem Gerät abzulassen, stellen Sie das Gerät
über ein Waschbecken oder einen anderen Behälter und
ziehen Sie den Auslöser um 90° herunter. Das Wasser fließt
aus dem Loch an der Unterseite des Geräts unter dem
Auslöser ab. Wischen Sie den Rest des Wassers mit einem
weichen Tuch ab.
REGELMÄSSIGE PRÜFUNG DES GERÄTES
Prüfen Sie regelmäßig, ob Teile des Gerätes eventuelle
Beschädigungen aufweisen. Sollte dies der Fall sein, darf
das Gerät nicht mehr benutzt werden. Wenden Sie sich
umgehend an Ihren Verkäufer, um das Gerät reparieren zu
lassen.
Was tun im Problemfall?
Kontaktieren Sie Ihren Verkäufer und bereiten Sie folgende
Angaben vor:
• Rechnungs – und Seriennummer (letztere finden Sie
auf dem Typenschild).
• Ggf. ein Foto des defekten Teils aufnehmen.
• Ihr Servicemitarbeiter kann besser eingrenzen worin
das Problem besteht, wenn Sie es so präzise wie
möglich beschreiben. Je detaillierter Ihre Angaben
sind, umso schneller kann Ihnen geholfen werden!
ACHTUNG: Öffnen Sie die Maschine niemals ohne
Rücksprache mit dem Kundenservice. Dies kann Ihren
Gewährleistungsanspruch beeinträchtigen!
6
U S E R M A N U A L
The operation manual must be reviewed.
Never dispose of electrical equipment together
with household waste.
This machine conforms to the CE declarations.
For indoor use only.
This is a device of the 2nd protection class.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details it may
differ from the actual machine.
The original operation manual is in German. Other
language versions are translations from German.
USER MANUAL
SAFETY INSTRUCTIONS
General safety information for the use of electrical devices
To avoid injury from fire or electric shock, please ensure
the compliance with the safety instructions when using this
device. Please read the instructions carefully and make sure
that you have understood them well. Keep the manual near
the equipment to be able to read it at any time. Always
use current sources which are connected to the ground and
which provide the necessary voltage (this info is indicated
on the label on the device). If you have any doubts, let an
electrician check that your outlet is properly grounded.
Never use a damaged power cable. Do not open the unit
in damp or wet environment, or if your hands or body are
damped or wet. Protect the unit from solar radiation. Use
the device in a protected location to avoid damaging the
equipment or endangering others. Make sure the device is
able to cool and avoid placing it too close to other devices
that produce heat. Before cleaning the device, disconnect it
from the power source. Use a soft damp cloth for cleaning.
Avoid using detergents and make sure that no liquid enters
the unit. No internal element of this device needs to be
maintained by the user. Opening the device without our
approval leads to a loss of warranty!
SAFETY GUIDELINES
1. Please read and understand these instructions
carefully before operating the device! Please observe
the safety guidelines carefully in order to prevent
damages through improper use!
2. Please keep this manual available for future
reference. If this device is passed on to third parties,
the manual must be passed on with it.
3. Only use this device indoors and for its intended use.
4. We do not offer any warranty for damages resulting
from improper use or incorrect operation.
5. Before the first use, check whether the main voltage
type and current comply with the indicated data on
the type plate.
6. This device is not intended to be used by persons
(including children) with limited physical, sensory or
mental aptitude, as well as lack of experience and/or
knowledge, unless they are supervised by a person
responsible for their safety or if they have received
instructions as to how the device is used.
7. ELECTRIC SHOCK HAZARD! Do not attempt to repair
the unit yourself. In case of device failures, repairs
must be done by qualified experts.
Rev. 09.02.2018 Rev. 09.02.2018
8. Please check the main plug and the power cable
regularly. If the power cable for this device is
damaged, it has to be replaced by the manufacturer
or its customer service or another qualified person in
order to prevent hazards.
9. Prevent damages to the power cable by avoiding
squeezing or bending it or rubbing it on sharp
edges. Also keep the power cable away from hot
surfaces and open flames.
10. ATTENTION! DANGER TO LIFE! While cleaning, never
immerse the device in water or other liquids.
11. Under no circumstances should the housing be
opened.
12. Clean the beer dispenser regularly to prevent
permanent soiling.

TECHNICAL DATA

Product name Beer dispenser
Model RCBD-5L
Rated voltage [V]/ 230~/50
Frequency [Hz]
zęstotliwość
Rated power [W] 65
Cooling temperature [°C] 2-12
Keg volume [l] 5
Weight [kg] 6,5
SCOPE OF APPLICATION
The beer dispenser is designed for cooling and pouring
beer from keg type barrels.
Do not use the beer dispenser for cooling other liquids and
drinks in cans, bottles, etc.
The user is liable for any damage resulting from
nonintended use of the device.
BEFORE THE FIRST USE
Upon receipt of the goods, check the packaging for
integrity and open it. If the packaging is damaged, please
contact your transport company and distributor within 3
days, and document the damages as detailed as possible.
Do not turn the package upside down! When transporting
the package, please ensure that it is kept horizontal and
stable.
DISPOSAL OF THE PACKAGING
Please keep all packaging materials (cardboard, plastic
tapes and Styrofoam), so that in case of a problem, the
device can be sent back to the service centre in accurate
condition!
INSTALLING THE APPLIANCE
APPLIANCE LOCATION
The temperature of the environment must not exceed 45°C
and the relative humidity should not exceed 85%. Ensure
good ventilation in the room in which the device is used.
The distance between the back of the chain toaster and the
wall should be at least 20 cm, a minimum distance between
the sides of the device and the walls should be at least 10
cm on each side and 35 cm between the top of the device
and the ceiling.
7