Switching On/Off; Using The Speaker; Wireless Function - HQ-Power HQSA1008 Manual Del Usuario

5.3 Switching On-Off
To switch the speaker on/off, press and hold the on-off knob for 2 seconds.
6.

Using the Speaker

6.1 Playing Music
Insert a USB stick into the USB port: the audio files will play automatically.
Play/pause the track with the play/pause button. Select the previous/next track with the
backward/forward button. Adjust the volume level with the volume knob.
Refer to the chapter Aux/Mic/Guitar Inputs below for other compatible music appliances
or MP3/MP4 players.
6.2

Wireless Function

Press the mode button to select the wireless function. The speaker will beep twice.
Activate the wireless function on your mobile phone and search for the speaker [S37].
Pair the speaker to your phone.
You can now play music files from your mobile phone. Control the track from your
mobile phone and adjust the volume level with the volume knob on the speaker or
mobile phone.
6.3 FM Radio
The included audio cable acts as an antenna. Insert the audio cable into the aux input
prior to selecting the FM radio.
Next, press the mode button to select the FM radio.
In playing mode, short press the play/pause button to auto search and store the FM
frequencies. Select the channel with the backward/forward button.
6.4 Aux/Mic/Guitar Inputs
Insert the audio cable into the aux input and select the aux function using the mode
button.
Connect your auxiliary device to the speaker. Control all functions from your auxiliary
device except for the volume control.
Connect your microphone or guitar to the respective microphone or guitar input. Adjust
the volume using the mic volume button. Note that this function cannot be used while
the FM radio is playing.
V. 01 – 08/02/2018
HQSA1008
5 ©Velleman nv