Unpacking; Requirements On The Installation Location; Safety Hazards; Child Safety Lock - Graef EVO Manual De Instrucciones

water.
•
The unit must not be used without the food
holder (D) unless the size and shape of the
food permits use without.

Unpacking

Proceed as follows to unpack the unit:
•
Remove the unit from the box.
•
Remove the packaging parts.
•
Remove any stickers on the unit (do not
remove the typeplate).

Requirements on the installation location

For safe and faultfree operation of the unit,
the following requirements of the installation
location have to be met:
•
The unit has to be placed on a solid, flat,
horizontal and non-slipping surface mit a
sufficient weight-carrying capacity.
•
Choose the location in such a way that children
cannot reach the sharp blade of the unit.
16

Safety hazards

The very sharp blade(G) can cut off parts of the
body. Your fingers are especially endangered. For
this reason, do not reach into the space between
the stop plate (F) and the blade (G) as long as the
stop plate (F) is not closed completely, i.e. set to
"0".

Child safety lock

In order to secure the blade (G), (the stop plate
(F) has to be closed (i.e. set to "0")), the slide
(E) can be moved in front of the blade (G) and
the slide bar (K) can be pressed in. The slide
(E) is stuck.

Short-time operation

This unit has been fitted with short-time
operation system of 5 minutes.

Overload protection

If the blade (G) is blocked by a hard object
(such as bones) during the cutting process, the
machine is switched off in order to protect the
gear and the motor. Carefully remove the cause
of blockage; in the process keep your fingers