Bodum 11381-3 BISTRO Instrucciones De Uso página 6

Figure D Place the bowl (2) on the base (7), press it down and
lock it in place by turning it in a clockwise direction.
Press the release lever for the mixing arm (6) and lower the
mixing arm (11) slowly.
The stand mixer can be used once the plug is inserted into
the power socket and the ON/OFF switch (5) is turned to ON.
REMOVING THE Before removing the mixing attachments (8, 9, 10), splash
INDIVIDUAL
guard with filler opening (11) or bowl (2), please ensure that
ATTACHMENTS
the speed control (4) is set to stop, that the ON/OFF switch
(5) is turned to OFF and that the plug has been removed from
the power socket.
In order to remove the bowl (2) you must first press the
release lever for the mixing arm (6), raise the mixing arm (1)
and release the bowl (2) from the stand mixer by turning it in
an anti-clockwise direction.
In order to remove a mixing attachment (8, 9, 10) you must first
press the release lever for the mixing arm (6), raise the mixing
arm (1) and release the mixing attachment (8, 9. 10) from the
stand mixer by turning it in an anti-clockwise direction.
In order to remove the splash guard with filler opening (11)
you must first press the release lever for the mixing arm (6),
raise the mixing arm (1) and release the bowl splash guard
with filler opening (11) from the stand mixer by turning it in an
anti-clockwise direction.
HOW TO USE THE
After attaching the splash guard with filler opening (11) as
SPLASH GUARD
described in «HOW TO USE YOUR STAND MIXER» it will protect
WITH FILLER
worktops and the stand mixer against spattering. You can
OPENING
also use the filler opening to add ingredients to the bowl (2).
CONNECTING The mixing attachments (8, 9, 10) must always be fitted
THE POWER
before connecting the stand mixer to the power supply.
SUPPLY
Before connecting the stand mixer to the power supply,
please ensure that the speed control (4) is set to stop and that
the ON/OFF switch (5) is turned off.
Before operating the stand mixer the mixing arm (1) must
have been closed and clicked into position. The stand mixer
has a safety feature which ensures that the stand mixer can-
not start while the mixing arm is raised.
10
MIXING IMPORTANT. The stand mixer must be switched off after 5
minutes permanent operation for a period of 10 minutes to
prevent the motor from overheating.
For processing stiff bread dough or pizza dough do not use
more than 1 kg of flour. The operation should take no longer
than 5 minutes.
Lower the mixing attachment (8,9,10) into the ingredients in
the bowl (2) and click the mixing arm (6) into place. Then use
the speed control (4) to select the desired speed. Please refer
to chapter «SPEED SETTINGS».
Use the splash guard (11) to avoid spattering.
When you have finished mixing, set the speed control (4) to
stop, turn the ON/OFF switch to OFF and remove the plug
from the power socket.
REMOVING
Please ensure that the speed control (4) is set to stop, that
MIXING
the ON/OFF switch (5) is turned to OFF and that the plug has
ATTACHMENTS
been removed from the power socket.
It is essential that the mixing attachment has stopped rotat-
ing. Remove the mixing attachment (8,9,10) from the insertion
opening (3) by turning it in an anti-clockwise direction.
MAINTENANCE Before cleaning, set the speed control (4) to stop, turn the
AND CARE
ON/OFF switch (5) to OFF and remove the plug from the
power socket.
Never use scouring powder.
Any other servicing should be performed by an authorized
service representative.
CLEANING Excess ingredients can be removed from the mixing attach-
THE MIXING
ments (8, 9, 10) with a rubber or plastic scraper.
ATTACHMENTS
The mixing attachments (8, 9, 10), splash guard (11) and bowl
(2) can be washed by hand or in the dishwasher.
CLEANING THE The entire housing of the stand mixer may only be cleaned
HOUSING
with a damp cloth.
Never immerse the stand mixer, the plug or the power cable
in water. Please bear in mind that it is an electrical appliance.
11
EN