Multiplex FunJet Ultra Instrucciones De Montaje página 8

Examine your kit carefully!
MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope that you
are completely satisfied with the contents of your kit. However, we would ask you to check all the parts before you start
construction, as we cannot exchange components which you have already worked on. If you find any part is not acceptable for
any reason, we will readily correct or exchange it after we have checked it. Just send the component to our Model Department,
with adequate postage pre-paid. Please be sure to fill in the complaint form, duly completed.
We are constantly working on improving our models, and for this reason we must reserve the right to change the kit contents in
terms of shape or dimensions of parts, technology, materials and fittings, without prior notification. Please understand that we
cannot entertain claims against us if the kit contents do not agree in every respect with the instructions and the illustrations.
Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings. Building and operating them
safely requires a certain level of technical competence and manual skill, together with discipline and a responsible
attitude at the flying field. Errors and carelessness in building and flying the model can result in serious personal injury
and damage to property. Since we, as manufacturers, have no control over the construction, maintenance and
operation of our products, we hereby expressly point out these hazards and emphasise your personal responsibility.
Additional items required:
MULTIPLEX radio control system components for the FunJet ULTRA:
Recommended components
2 x Nano Pro MG digi4 servo
alternatively: Nano Pro KARBONITE®
RX-6-DR light M-LINK receiver
2 x 30 cm servo extension lead
Recommended power system: FunJet ULTRA power set
Contents: C3514 - 2900 brushless motor
MULTIcont BL-70 S-BEC speed controller
6" x 5.5" propeller
Propeller driver and spinner, for 4 mm Ø shafts, prop bore 8 mm
or
FunJet ULTRA power set, Li-BATT powered
Contents as # 33 2647, plus LiBATT FX 3/1-3200 (M6) battery
Flight battery
MULTIPLEX LiBATT FX 3/1-3200 (M6) flight battery
Battery charger:
MULTIcharger LN-6015 EQU
Charge current 100 mA ... 6 A
1 - 15 NiCd / NiMH cells and 1 - 6 Lithium-Polymer (LiPo) cells
Adhesive:
Tools:
Scissors, combination pliers, balsa knife, screwdriver, 4 - 5 mm Ø bradawl or small round file.
Specification:
Wingspan
Fuselage length
All-up weight
Wing area
Wing loading
RC functions
8
Zacki ELAPOR® 20 g
Zacki ELAPOR® super liquid, 10 g
783 mm
750 mm
approx. 875 g
approx. 14.5 dm²
60 g/dm²
Aileron, elevator (delta mixer required) and throttle
Order No. 6 5117
Order No. 6 5118
Order No. 5 5809
Order No. 8 5031
Order No. 33 2647
Order No. 33 3091
Order No. 7 2287
Order No. 73 3195
Order No. 33 2329
Order No. 33 3647
Order No. 15 7371
Order No. 9 2532
VE 20 Order No. 59 2727
VE 20 Order No. 59 2728
Kit Order No. 21 4245