Washer Drain System - Whirlpool CGT9100GQ Instrucciones De Instalación

WASHER DRAIN SYSTEM

The washer can be installed using the standpipe drain system
(floor or wall), the laundry tub drain system, or the floor drain
system.
Standpipe drain system – wall or floor
The standpipe drain requires a minimum diameter standpipe
of 2" (51 mm). The minimum carry-away capacity can be no
less than 10 gal. (38 L) per minute.
Wall
The top of the standpipe must be at least 30" (762 mm) high
and no higher than 96" (2.4 m) from the bottom of the washer.
Floor
30" min.
(762 mm)
22
Laundry tub drain system
The laundry tub needs a minimum 20 gal. (76 L) capacity.
The top of the laundry tub must be at least 30" (762 mm)
above the floor.
30"
(762 mm)
Floor drain system
The floor drain system requires a siphon break that may be
purchased separately.
The siphon break (Part Number 285834) must be a minimum
of 28" (710 mm) from the bottom of the washer. Additional
hoses might be needed.
Siphon
break
28"
(710 mm)