Gisowatt Techno Cleaner Serie Instrucciones De Uso página 18

English
1 - DUST-BAG (fi g. "D1" - "D2" - "D3")
(Model "TechnoCleaner 15" ..................................Pack code 83 144B0I).
(Models "TechnoCleaner 18 e 20" .........................Pack code 83 140B0K).
(Models "TechnoCleaner 30 e 35" .........................Pack code 83 142B0K).
The bag should not be reused and must be changed.
How to replace the dust bag
• Remove the plastic fl ange from the air inlet connector (fi g."D1").
• Take out the full bag (fi g."D2").
• Close the plastic fl ange with the cap provided (fi g."D3").
2 - FILTER CARTRIDGE (fi g. "D4" - "D5" - "D6")
Included for the models: "TechnoCleaner 18 - 35" (code 83 200BOG)
Options for models: "TechnoCleaner 15 - 20 - 30" (code 83 201BOG)
• Remove the fi lter cartridge from the motor support.
• Clean the fi lter cartridge (b) frequently using a soft bristle brush (fi g."D4").
• To clean more thoroughly, use a shower fi tting and direct the jet of water from the inside
towards the outside of the fi lter cartridge (fi g. "D5").
WARNING:
• Before putting the cartridge back on, make sure it is completely dry.
• If the fi lter cartridge is heavily caked or worn, replace the fi lter element only (b).
3 - BASKET PRE-FILTER (fi g. "E3" - "E4")
Optional for models: "TechnoCleaner 15 - 20 -30" (cod. 83 038B4I)
• To clean the polypropylene basket pre-fi lter, shake it in a garbage container (fi g. "E3").
• Blow on it if necessary (fi g. "E4").
16
The fi lter is extremely delicate when wet.
Avoid using direct jets of water or making manoeuvres that
could damage it (fi g."D6").
E3
E4