Installation Instructions; Before You Start; Remove Shipping - Maytag MTW5600TQ1 Manual De Uso Y Cuidado

Lavadora automatica
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

GROUNDING
iNSTRUCTiONS
For a grounded, cord-connected
washer:
This washer must be grounded. In the event of a malfunction
or breakdown, grounding will reduce the risk of electrical
shock by providing a path of least resistance for electric
current. This washer is equipped with a cord having an
equipmenbgrounding
conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local
codes and ordinances.
WARNING:
Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in
doubt as to whether the appliance is properly grounded.
Do not modify the plug provided with the appliance - if it will
not fit the outlet, have a proper outlet installed by a qualified
electrician.
For a permanently
connected washer:
This washer must be connected to a grounded metal,
permanent wiring system, or an equipment grounding
conductor must be run with the circuit conductors and
connected to the equipment-grounding
terminal or lead on
the appliance.
INSTALLATION
INSTRUCTIONS
BEFORE YOU START
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
NOTE: lo avoid floor damage, set the washer onto cardboard before moving across floor.
REMOVE
SHIPPING
MATERIALS
Removing
the shipping
material
is necessary
for proper
operation.
If the shipping
material
is
not removed,
the washer will
make excessive
noise.
1.
Move the washer
to within
approximately
3 ft (90 cm) of its final location.
2.
[he washer
must be in the upright
position
and not tilted before removing
the shipping
material.
3.
Locate the yellow
shipping
materials
on the rear of the machine,
near the bottom.
Follow
the steps for your particular
model,
either
the one with
the straight
power cord
and cord
restraint
or the looped
power cord version.
Straight
power
cord
I
I
Straight
power
cord

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido