• You can set it to turn cooking zones off after the
set time is up.
• You can set the timer for up to 9 hour and 59 minutes.
Using the Timer as a Minute Minder
If you are not selecting any cooking zone
1.
Make sure the cooktop is turned on.
Note: you can use the minute minder even
if you're not selecting any cooking zone.
2.
Set the time by touching the " - " or " + " control
of the timer
Hint: Touch the " - " or " + " control of the timer
once to decrease or increase by 1 minute.
Hold the " - " r " + " control of the timer to
decrease or increase by 10 minutes.
3.
Touching the " - " and " + " together, the timer
is cancelled, and the"0:00" will show in the minute
display.
4. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
. .
5. Buzzer will beep for 30 seconds and the timer
indicator shows "- - " when the setting time
finished.
Setting the timer to turn cooking zones off
If the timer is set on one zone:
1. Touching the heating zone selection control
that you want to set the timer for.
2.
Touch " - "or " + " control , The minder indicator
will start flashing and "0:10" will show in the
timer display.
3. Set the time by touching the" - "or " + " control of the
timer
Hint: Touch the " - " or " + " control of the timer
once will decrease or increase by 1 minute.
Touch and hold the " - " or " + " control of the timer
will decrease or increase by 10 minutes.
4. Touching the " - "
cancelled, and the" 00" will show in the minute display.
. .
5. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
6. When cooking timer expires, the corresponding
cooking zone will be switch off automatically.
PT-8
:
and " + " together, the timer is
. .
Other cooking zone will keep operating if
they are turned on previously.
. .