Safety Mode; Wifi Function - Hoover HESD4 WIFI Manual De Instrucciones

If the timer is set on more than one zone:
1. When you set the time for several cooking zones
simultaneously, decimal dots of the relevant
cooking zones are on. The minute display shows
the min. timer. The dot of the corresponding
zone flashes.
:
2. Once the countdown timer expires, the
corresponding zone will switch off. Then
it will show the new min. timer and the dot
of corresponding zone will flash.
. .
Using the Keep Warm function
Actived the Keep warm function
1. Touching the heating zone selection control
2. Touching the keep warm control
indicator show " "
Cancel the keep warm function
Touch "-" or "+" control of the corresponding zone,
then the cooking zone will revert to the level you select.
(set to 15 minutes)
(set to 45 minutes)
,the zone
EN-8

Safety mode

To ensure the safety of children, the induction hob is fitted with
an safety lock.
Lock:
In working mode, press the "
into the lock mode, timer will display "
rest of the keys are disabled except the "
In standby mode, press the "lock" key, the hob then goes
into the lock mode, the timer shows "
of the keys are disabled. The timer shows"
while and then goes off.
If you press the control , "
while.
Unlock:
Hold down the "Lock" key for 3 second, and the lock
function will be deactivate.

WIFI FUNCTION

First of all, you should download S S imply-Fy and install to your
portable device. Then enroll your induction hob.
Refer to annex for details.
To use the WIFI function, switch the hob on and press
the WIFI control.The wifi LED will flash fast for 5 seconds
which means the WIFI module is booting up. If the WIFI
module connects to the router, the wifi LED will remain on all
all the time. Otherwise, the WIFI LED will be flashing in
cycles of 1 second on 1 second off.
When the connection is made, you can find numerous
information on S i mply-Fy, e.g. Zone power, time remaining etc.
" key, the hob then goes
" and the
" key.
" and the rest
" for a
" will be displayed for a