Cameo EVOS W7 Manual De Usuario página 10

Select by turning the encoder, confirm by pressing, change value or status by turning, confirm by pressing. Return with

Address Setting the DMX start address
Channel mode Selecting the DMX mode
Network Network settings:
Settings IP address: 1. Set block, con-
firm, Set 2nd block, confirm ...
Subnet mask: 1. Set block, con-
firm, Set 2nd block, confirm ...
Send to DMX The Art-Net control signal can
be forwarded in the defined
universe to DMX OUT (Art-Net
to DMX), to W-DMX (Art-Net to
W-DMX) or to both (Art-Net to
DMX and W-DMX). The function
is deactivated by means of
"Disable".
The Art-Net control signal can
be forwarded in any universe
from 000 to 254 (Select
Universe) to DMX OUT (Art-Net
to DMX), to W-DMX (Art-Net to
W-DMX) or to both (Art-Net to
DMX and W-DMX).
10
Art-Net
001–512

16CH / 18CH / 23CH /
33CH / 43CH / 87CH

IP Address xxx.xxx.xxx.xxx
Subnet Mask xxx.xxx.xxx.xxx
Universe 000–254
Universe Group 000–127

Disable
Current Universe 
(alternative to "User
Art-Net to DMX
Universe")
Art-Net to DMX
and W-DMX
User Universe 
(alternative to
Select Universe
"Current Universe")
Sending Options

.

Send mode 
G3
G4s
Connect 
Link
Unlink
000–254

Art-Net to DMX
Art-Net to DMX

and W-DMX
Send 
mode
G3
G4s
Connect 
Link
Unlink
Art-Net to 
W-DMX
Send 
mode
G3
G4s
Connect 
Link
Unlink